Ion Chromatography System FM-ICS-A102 operates at a maximum pressure of 42 MPa (6000 psi) ensuring stable high-performance ion separation. Integrated single-chassis construction minimizes dead volume while optimizing internal fluid pathways. Full PEEK flow architecture supports wide pH compatibility with strong resistance to chemical corrosion. Built-in eluent generation and online vacuum degassing maintain consistent flow and signal stability. Designed to deliver precise analytical performance through intelligent automation and compact engineering.
$26,962.00
| Maximum pressure | 42 MPa / 6000 Psi |
| Flow range | 0.001 to 10.000 mL/min |
| Flow accuracy | ≤0.1% |
| Flow repeatability | RSD ≤0.01% |
| Pressure fluctuation | ≤0.5% |
| Flow increment | ≤0.001 mL/min |
| Materials | quartz plunger, high-pressure seals, PEEK pump head; acid/alkali/organic solvent resistant and durable. |
| Over pressure protection | automatic alarm and shutdown when pressure exceeds preset limit. |
| Electrically Controlled Autosampling Valve head material | PEEK |
| Lifetime | ≥100,000 switching cycles |
| Anion Column | High-capacity anion separation column capable of analyzing F⁻, Cl⁻, Br⁻, NO₂⁻, NO₃⁻, SO₄²⁻, PO₄³⁻, ClO₂⁻, ClO₃⁻, BrO₃⁻, dichloroacetic acid, trichloroacetic acid, formate, acetate, oxalate, etc. |
| Cation Column | High-capacity cation separation column capable of analyzing Li⁺, Na⁺, K⁺, NH₄⁺, Ca²⁺, Mg²⁺, methylamine, dimethylamine, trimethylamine, etc. |
| Maximum pressure of Anion and Cation Column | ≥3000 psi |
| Flow rate of Anion and Cation Column | ≥2.0 mL/min |
| Suppressor | Factory-produced electrolytic continuously regenerated suppressor, no external regenerant or pumps required. |
| Suppression capacity | ≥100 μeq/min |
| Dead volume | ≤50 μL |
| Conductivity Detector | high-sensitivity, large-capacity bipolar conductivity detector with wider detection range |
| Temperature compensation of Conductivity Detector | ambient +5°C to 80°C |
| Max pressure tolerance of Conductivity Detector | ≥8 MPa |
| Temperature control accuracy of Conductivity Detector | ±0.1°C |
| Baseline noise of Conductivity Detector | ≤0.5% FS |
| Baseline drift of Conductivity Detector | ≤10.0% FS / 30 min |
| Minimum detection limit of Conductivity Detector | Cl⁻ ≤0.0005 μg/mL; Li⁺ ≤0.0005 μg/mL |
| Qualitative repeatability of Conductivity Detector | ≤0.5% |
| Quantitative repeatability of Conductivity Detector | ≤1% |
| Temperature Control System | Dual-isolation, internal circulation, high-precision temperature control system with independent column oven and shared oven for detector and suppressor, ensuring high stability. |
| Power consumption | 1200 W |
| Power supply | 220 V 50 Hz |
| Dimension (W × D × H) | 518 × 422 × 768 mm |
| Packaging dimension (W × D × H) | 600 × 500 × 800 mm |
| Net weight | 52 kg |
| Gross weight | 62 kg |
| Accessory | Quantity |
| Anion column | 1 set |
| Cation Column | 1 set |
| Four-stage online degassing | 1 set |
| Autosampler 120wells | 1 set |
| Anion eluent | 1 set |
| MSA Built-in Eluent Generator | 1 set |
Autosampler specifications:
| 3D autosampler | 120 × 1.5 mL sample positions |
| Injection repeatability | RSD ≤0.5% (full-loop injection) |
| Sample residue | ≤0.01% (with specified needle-wash procedure) |
| Dual operation | manual panel control and software control |
| Optional configuration | one 10-port valve for simultaneous dual-channel injection |