Fison Vacuum Aspirator FM-VAP-A100 removes liquid at up to 1.6 L/min into a 2 L collection bottle, with aspiration speed set by a knob and operation started through a foot pedal switch. A 0.45 μm hydrophobic membrane filters the gas drawn through the system, and a built-in battery lets this laboratory vacuum aspirator run cordless at ≤60 dB. Liquid is removed from culture vessels and sample containers by handheld aspiration.
$344.00
| Maximum Aspiration Speed | 1.6 L/min |
| Aspirator Bottle Volume | 2 L |
| Liquid Aspiration Method | Handheld liquid aspiration |
| Allowed Ambient Humidity | 5 to 40 ℃, 80% RH |
| Battery Capacity | 2600 mAh |
| Battery Level Display | LED display |
| Control Method | Knob switch, foot pedal switch |
| Speed Control Method | Knob speed control |
| Noise | ≤ 60 dB |
| Gas Filtration | 0.45 μm hydrophobic filtration membrane |
| Power Consumption | 6 W |
| Dimensions (L×B×H) | 147×147×286 mm |
| Weight | 0.8 kg |
Vacuum Aspirator FM-VAP-A100 handles liquid removal in cell culture and sample preparation, including sterile environments. The handheld, battery-powered unit is controlled by a knob or foot pedal switch, keeping both hands free while it aspirates liquids safely and efficiently.
Fison Vacuum Aspirator removes liquid by handheld aspiration at a maximum aspiration speed of 1.6 L/min and collects it in a 2 L aspirator bottle. As a vacuum aspirator for cell culture, it draws liquid off from a vessel under negative pressure, and the handheld aspiration method gives direct control over where the liquid is taken from. The vacuum system runs continuously with low noise and vibration, while the aspirator bottle holds the collected liquid until it is emptied.