Fison Benchtop Multi parameter Water Quality Meter FM-BMW-A101 combines pH, ORP, ion, conductivity, dissolved oxygen, salinity and temperature measurement in one instrument. Its pH and conductivity channels work as a full benchtop pH conductivity meter, with ±0.002 pH accuracy, up to 6-point calibration and automatic buffer recognition. Ion analysis supports direct reading, standard addition and GRAN methods, and GLP-compliant storage keeps results for review and recalculation. This water quality meter covers routine physicochemical analysis of water samples, from pH to dissolved oxygen, at a single workstation.
$1,830.00
| Parameters measured | pH, mV/ORP, pX, ISE, conductivity, resistivity, TDS, salinity, dissolved oxygen, temperature |
| pH range | −2.000 to 20.000 pH |
| pH resolution | 0.1 / 0.01 / 0.001 pH |
| pH accuracy | ±0.002 pH |
| pH calibration points | Up to 6 |
| pH buffer recognition | NIST, GB, DIN, USA, JIS |
| pH custom standards | Yes |
| pH calibration reminder and slope limit | Yes |
| mV/ORP range | −2000.00 to 2000.00 mV |
| mV/ORP resolution | 0.1 / 0.01 mV |
| EH ORP mode | Yes |
| ORP calibration | 1 custom point (relative mV) |
| pX range | −2.000 to 20.000 pX |
| pX resolution | 0.1 / 0.01 / 0.001 pX |
| pX accuracy | ±0.002 pX |
| pX calibration points | Up to 6 |
| ISE range | 1.000e-9 to 9.999e+9 |
| ISE units | mol/L, mmol/L, g/L, mg/L, µg/L, ppm, ppb |
| ISE resolution | Up to 4 significant digits |
| ISE accuracy | ±0.3% |
| ISE calibration points | Up to 6 |
| ISE measurement modes | Direct reading, standard addition, sample addition, GRAN |
| Conductivity range | 0.000 µS/cm to 2000 mS/cm |
| Conductivity resolution | 0.001 µS/cm minimum, varies with range |
| Conductivity accuracy | ±0.5% FS |
| Conductivity reference temperature | 5, 10, 15, 18, 20, 25 °C |
| Conductivity calibration points | Up to 5 |
| Conductivity standard recognition | 10 µS/cm, 84 µS/cm, 500 µS/cm, 1413 µS/cm, 12.88 mS/cm, 146.5 µS/cm, 1408 µS/cm, 12.85 mS/cm, 111.3 mS/cm |
| Conductivity temperature compensation | None, linear, pure water |
| Resistivity range | 5.00 Ω·cm to 100.0 MΩ·cm |
| Resistivity resolution | 0.01 Ω·cm minimum |
| Resistivity accuracy | ±0.5% FS |
| TDS range | 0.000 to 1000 ppt |
| TDS resolution | 0.001 ppm minimum, varies with range |
| TDS accuracy | ±0.5% FS |
| Salinity type | NaCl |
| Salinity range | 0.0 to 80.0 ppt |
| Salinity resolution | 0.1 ppt |
| Salinity accuracy | ±1 ppt |
| DO range | 0.00 to 99.99 ppm |
| DO resolution | 0.01 ppm |
| DO calibration | Air-saturated water or zero oxygen |
| DO barometric compensation | Automatic |
| DO salinity correction | Manual |
| DO pressure units | kPa, mbar, Torr, atm |
| Reading modes | Auto read (fast, medium, slow), timed, continuous |
| Endpoint display | Reading, stable, locked |
| Temperature compensation | ATC and MTC |
| Data storage | 1000 sets per parameter |
| GLP features and log management | Yes |
| pH electrode input | BNC (Q9) |
| DO probe input | 4-pin aviation connector |
| Conductivity probe input | 5-pin aviation connector |
| USB output | USB 2.0 flash drive, PC, scanner |
| RS-232 output | Printer, auto-sampler |
| Display | 7-inch colour high-contrast LCD touchscreen |
| Backlight, date and time | Yes |
| Auto shutdown | 1 to 60 min, or off |
| Protection rating | IP54 |
| Power | AC adapter, 100 to 240 V AC input, 24 V DC output |
| Product Dimensions | 220 × 195 × 68 mm |
| Net Weight | 950 g |
Benchtop Multi parameter Water Quality Meter FM-BMW-A101 is used in water testing laboratories, environmental monitoring labs, and the quality control labs of drinking water, wastewater and pharmaceutical facilities. It analyses water and aqueous samples for pH, conductivity, dissolved oxygen, ion concentration and salinity from one benchtop instrument, supporting routine testing and regulatory compliance.