Atomic Absorption Spectrophotometer FM-AAS-A100 is a fast and accurate microprocessor controlled analyzer with built-in computer data processing and LCD display. Analysis of metal ions by air-acetylene flame and graphite furnace atomizer with absorption at 190 to 900 nm wavelength. Features Czerny-Turner monochromator 1200 line/mm grating optics, paired with D2 background correction avails greater performance. Multiple atomizer configurations allow high-intensity analysis and ultimate ease of use within multiple applications settings such as environmental, agricultural and clinical, as well as high throughput labs.
Specifications
Wavelength range | 190 to 900 nm |
Wavelength accuracy | ≤ ±0.5 nm |
Wavelength repeatability | ≤0.3 nm (single direction) |
Spectrum bandwidth | 0.2 nm, 0.4 nm, 0.7 nm, 1.4 nm, 2.4 nm, 5.0 nm |
Resolution | < 40% |
Base line stability | ±0.004 Abs/30 min |
Grating | 1200 lines / mm |
Inflamer | All-metal titanium burner with 10 cm slit |
Atomizer | Efficient glass atomizer |
Lamp | Hollow cathode lamp |
Lamp stand | 6 lamps automatic turret, automatic alignment |
Characteristic concentration of copper | ≤0.04 mg/ml/1% |
Detection limit of copper | ≤0.008 mg/ml |
D2 Background calibration ability | Greater than 30 times |
Flame system | Air-acetylene flame system |
Protection system | Can inevitably cut off gas if pressure is low, power cut-off, flame out and alteration of the burner |
Standard interface | RS232 |
Power supply | 220 V/ 50 Hz, 3 A |
Gross weight | 160 kg |
Features
Applications
Accessories
Accessories no | Accessories name |
1. | Oil-free air compressor |
2. | Glass Atomizer |
3. | Cu Hollow cathode lamp |
4. | Atomizer unit |
5. | Burner unit |
6. | Dust cover |
7. | Water-separating gas filter |
8. | Titanium burner: slit 10 cm |
Accessories Optional
Accessories no | Accessories name |
1 | GRAPHITE FURNACE SYSTEM: |
Heating steps- 9 steps | |
Temperature range: 20°C to 3000°C | |
Slope heating time: 0 to 999 s | |
Heating holding time: 0 to 999 s | |
Inert gas: argon | |
Inert gas pressure: 0.3 MPa | |
Cooling water flow rate: 2 L/min | |
Characteristic quantity: (Cd) ≤ 1 × 10 -12 g, (Cu) ≤ 1 × 10 -10 g | |
Power supply: 220 V/50 Hz 3A | |
Ambient temperature: 10 to 30 °C | |
Relative humidity: less than 85% | |
2 | Hydride generator |
3 | Graphite tubes |
4 | Acetylene Regulator |
5 | Printer |
6 | Software |
Fison Atomic Absorption Spectrophotometers offer high precision and sensitivity for detecting metal concentrations in various samples. They feature an advanced optical system with a high-resolution monochromator for enhanced spectral accuracy. These units provide automated sample handling, reducing manual intervention. They include a user-friendly interface and digital controls for easy operation. Our spectrophotometers deliver multiple calibration modes, allowing single and multi-element analysis to ensure versatility.