Differential Scanning Calorimeter FM-DSC-A200 covers a temperature range from ambient to 1250 °C for high-precision thermal analysis. Closed ceramic insulation furnace enhances signal sensitivity while delivering a stable measurement baseline. Its adaptive dynamic PID temperature control ensures accurate heating, cooling, and isothermal regulation. Dual-sensor architecture independently monitors furnace and sample temperatures for improved accuracy. It is designed to provide reliable thermal characterization through intelligent control and advanced data processing.
| Temperature Range | RT to 1250℃ |
| Heating Rate | 0.1 to 80℃/min |
| Temperature Accuracy | 0.01℃ |
| Temperature Resolution | 0.01℃ |
| Temperature Fluctuations | ± 0.01℃ |
| Temperature Repeatability | ± 0.1℃ |
| Constant Temperature Time | Program setting up to 24h |
| DSC Range | 0 to ± 2000 mW |
| DSC Accuracy | ± 0.001 mW |
| DSC Resolution | 0.001 mW |
| Timing Frequency | 16.6 Hz |
| Experimental Mode | FTC and STC modes can be set arbitrarily |
| Sampling Rate | 1 to 10 Hz programmable |
| Programmed Temperature Control | 12-stage temperature control for flexible settings in all stages |
| Instrument Calibration | Both the lower and upper computers have multi-point temperature correction function. |
| Temperature Control Method | Heating, constant temperature, cooling |
| Scan Type | Heating, cooling, isothermal scanning |
| Number of Scans | The number of cycle scans can be set up to 9999 times, and the data is automatically saved. |
| Atmosphere Control | The two-way atmosphere can be freely set, and the instrument automatically switches |
| Display | 7-inch LCD touch screen (24-bit) |
| Data Interface | Standard USB interface |
| Power Supply | AC 220 V 50/60 Hz |
| Dimensions | 390 × 450 × 450 mm |
| Packing Dimension | 620 × 520 × 550 mm |
| Net Weight | 22 kg |
| Gross Weight | 35 kg |
Differential Scanning Calorimeter FM-DSC-A200 is used for thermal analysis of polymers, pharmaceuticals, chemicals, foods, metals, and inorganic materials in research laboratories, quality control facilities, academic institutions, and industrial development centers to study phase transitions and heat-related properties.
Accessory | Quantity |
Power Cord | 1 piece |
Experimental Software USB Drive | 1 piece |
Ceramic Crucible | 100 pieces |
Tweezers | 1 piece |
Sample Spoon | 1 piece |
Data Cable | 1 piece |
Fuse (0.5 A) | 4 pieces |
