Differential Scanning Calorimeter FM-DSC-A200 covers a temperature range from ambient to 1250 °C for high-precision thermal analysis. Closed ceramic insulation furnace enhances signal sensitivity while delivering a stable measurement baseline. Its adaptive dynamic PID temperature control ensures accurate heating, cooling, and isothermal regulation. Dual-sensor architecture independently monitors furnace and sample temperatures for improved accuracy. It is designed to provide reliable thermal characterization through intelligent control and advanced data processing.
$10,437.00
| Temperature Range | RT to 1250℃ |
| Heating Rate | 0.1 to 80℃/min |
| Temperature Accuracy | 0.01℃ |
| Temperature Resolution | 0.01℃ |
| Temperature Fluctuations | ± 0.01℃ |
| Temperature Repeatability | ± 0.1℃ |
| Constant Temperature Time | Program setting up to 24h |
| DSC Range | 0 to ± 2000 mW |
| DSC Accuracy | ± 0.001 mW |
| DSC Resolution | 0.001 mW |
| Timing Frequency | 16.6 Hz |
| Experimental Mode | FTC and STC modes can be set arbitrarily |
| Sampling Rate | 1 to 10 Hz programmable |
| Programmed Temperature Control | 12-stage temperature control for flexible settings in all stages |
| Instrument Calibration | Both the lower and upper computers have multi-point temperature correction function. |
| Temperature Control Method | Heating, constant temperature, cooling |
| Scan Type | Heating, cooling, isothermal scanning |
| Number of Scans | The number of cycle scans can be set up to 9999 times, and the data is automatically saved. |
| Atmosphere Control | The two-way atmosphere can be freely set, and the instrument automatically switches |
| Display | 7-inch LCD touch screen (24-bit) |
| Data Interface | Standard USB interface |
| Power Supply | AC 220 V 50/60 Hz |
| Dimensions | 390 × 450 × 450 mm |
| Packing Dimension | 620 × 520 × 550 mm |
| Net Weight | 22 kg |
| Gross Weight | 35 kg |
Accessory | Quantity |
Power Cord | 1 piece |
Experimental Software USB Drive | 1 piece |
Ceramic Crucible | 100 pieces |
Tweezers | 1 piece |
Sample Spoon | 1 piece |
Data Cable | 1 piece |
Fuse (0.5 A) | 4 pieces |
Fison offers high-performance Differential Scanning Calorimeters for precise thermal analysis. These instruments operate on the principle of measuring heat flow differences between a sample and a reference under controlled temperature conditions. With a temperature range of RT to 550°C, they provide accurate measurements of heat flow and temperature transitions. Advanced temperature control, high sensitivity, and user-friendly interfaces make them well-suited for diverse applications