ICP Spectrometer FM-ICP-A200 with 160 to 1000 nm wavelength and 12 MHz±0.05% RF frequency ensures stable excitation performance. Its solid-state power design delivers consistent high-energy plasma generation. Optimized sampling system enhances atomization through precision geometry. Advanced optical configuration supports accurate multi-element detection. Reliable analytical structure guarantees repeatable spectrometric outcomes.
| Wavelength Range | 160 to 1000 nm |
| Grating | Middle step grating, 52.67 lp/mm, 64° sparkle angle |
| Numerical Aperture | F less than 8, ultra-high luminous flux |
| Target Size | 27.6 mm x 27.6 mm, 1024 x 1024 addressing detection units |
| Resolution | less than 0.0065 nm at 200 nm |
| Astigmatism | Equivalent background concentration of 10000 ppm Ca solution at As 189.042 nm less than 2 ppm |
| Light Chamber | Precision constant temperature, 35 ± 0.1°C, nitrogen purging (normal: 1.8 L/min, fast: 3.8 L/min) |
| Plasma Argon Flowmeter | 100 to 1000 L/h (1.6 to 16 L/min) |
| Auxiliary Argon Flowmeter | 100 to 1000 L/h (0.16 to 1.6 L/min) |
| Auxiliary Carrier Argon Flowmeter | 100 to 1000 L/h (0.16 to 1.6 L/min) |
| Pressure Maintaining Value | 0 to 0.4 MPa |
| Cooling Water Temperature | 20 to 25°C |
| Cooling Water Flow Rate | greater than 5 L/min |
| Cooling Water Hydraulic Pressure | greater than 0.1 MPa |
| Output Working Coil Inner Diameter | 25 mm |
| Torque Tube | Three concentric, external diameter 20 mm |
| Coaxial Nebulizer | Outer diameter 6 mm |
| Double Barrel Atomizing Chamber | Outer diameter 34 mm |
| Circuit Type | Solid-state RF Power supply, with auto match function |
| Frequency | 27.12 MHz ± 0.05% |
| Frequency Stability | less than 0.1% |
| Power Output Stability | less than 0.3% |
| Escaped RF Radiation | 30 cm away from instrument, Electric Field: E less than 2 V/m |
| Power Consumption | 800 to 1500 W |
| Power Supply | 220V, 30A |
| Dimension (L × B × H) | 1050 × 793 × 745 mm |
| Packaging Dimension (L × B × H) | 1250 × 950 × 900 mm |
| Net weight | 105 Kg |
| Gross weight | 120 Kg |
ICP Spectrometer FM-ICP-A200 is used for high-precision elemental analysis in laboratories requiring multi-element detection across environmental samples, metallurgical materials, geological specimens, petrochemical substances, pharmaceutical raw materials, and industrial quality-control workflows.
Cable | 1 line |
Plastic drum | 1 pc |
Argon Gas Reduction | 2 pcs |
PU tube 30 m | 1 pc |
PU tube 10 m | 1 pc |
PVC transparent tube | 1 meter |
Plug | 1 pc |
Ground copper braided wire | 15 lines |
Brass tube | 1 pc |
Filter element of filter tank | 4 pcs |
Capillary tube | 0.5 meter |
Torch pipe | 2 pcs |
Double cylinder fog chamber | 2 pcs |
Atomizer | 1 pc |
Pump head hose of Peristaltic Pump (Ф1.65 L45cm) | 3 lines |
Electronic Fuses(10A,250V,6×30mm) | 2 lines |
Electronic Fuses (6.3A,250V,5×20mm) | 2 lines |
Cylindric atomizer | 2 pcs |
Silicone tube (Inner 2mm, outer 4mm, hardness:55HRC) | 0.3 lines |
Hose adapter (ZCJH-2*6 INNER 6-2) | 4 pcs |
Hose adapter (ZC-1/16*3/32 INNER 1.6-2.4) | 4 pcs |
Spherical connector clamp | 1 pc |
O shape seal ring (32.5×3.55) | 2 pcs |
O shape seal ring (5.6×1.8) | 4 pcs |
Quick Connector(Φ6) | 2 pcs |
Raw material belt (26mm×20m, thin:0.1~0.2mm) | 1 roll |
Ribbon | 30 lines |
Toolkit | 1 set |
Computer (Lenovo) | 1 set |
Displayer (Lenovo) | 1 set |
Canon Printer (Laser printer) | 1 set |
Cooling water tank | 1 set |
Automatic Sampler | 1 |
